style2

Testing Facilities

In-House Chemical and Mechanical Testing Facilities

We pour Al.Bronze ASTM B148

Testing Facilities


 


Special Test

All incoming stainless steel and outgoing materials are checked and confirmed for free of Radioactive contamination with RAD check meter. As per customer requirement Stainless steel & Duplex stainless steel are tested for its Ferrite Number/Ferrite meter purchased from UK.


Inter Granular Corrosion Test (IGC)

On contractual requirement SAGPL can test certify Inter crystalline corrosion according to Practice B & E of ASTM 262 & Method A & B as per DIN ISO3651-2 Other practice & Method are tested are certified with Independent Laboratory.


Sand Testing

The Incoming moulding sands is tested for its finess and impurities using BSS Sieve Shaker and Clay Washer. The finess Number is calculated as AFS Number and the impurities are calculated in percentange according to in-house specification. Multicavity AFS specimens of 2"x2" are used for strength measurements at specified intervals fof chemical bonded sand.


In-House Chemical and Mechanical Testing Facilities

Chemical Tests (Ferrous & Non Ferrous)
  • Sand Test
  • Wet analysis
  • IGC -Inter Granular Corrosion test Spectro Analysis
  • Spectro Analysis

NDT Tests
  • Radio Graphic Test using IR192 and CB 60
  • MPT, DPT and UT
Mechanical Tests
  • Tensile
  • Impact - Charpy Impact testing - Can test upto -196 °C using liquid Nitrogen
  • Hardness by Brinell - and Rockwell methods
  • Micro Structure analysis
  • PMI